|
|
Plastomix Plastic Repair System is mainly oriented to
autobody shops and makes possible fast and easy repairs on most of the
damage to plastic parts. Most small crashes usually damage bumpers,
lights, front grills, blinkers and side protection.
The insurance companies are pushing the repair centres to repair instead
of replacing as it guarantees less expensive and faster operations.
The range is studied in order to fulfil the requirements of the industry
and two different cartridge sizes are available: 6fl oz and 1.6 fl oz
in the same following materials.
|
Rigid 2001 for repairing
rigid plastics
Colour: Black
Working time: 50-60 seconds
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
|
|
Flex 2002 for repairing
flexible plastics
Colour: Black
Working time: 50-60 seconds
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
 |
|
Clear 2003 for repairing
semi-rigid clear plastics
Colour: Amber
Working time: 50-60 seconds
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
 |
|
TPO 2004 for repairing
thermo-plastic olefine (TPO) such as TEO, Metton, PP, EPDM
Colour: Black
Working time: 50-60 seconds
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
 |
|
Semirigid 2005 for
repairing semi-rigid plastics
Colour: Black
Working time: 50-60 seconds
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
 |
|
Rapid Putty for
cosmetic finishing and small scratches; to be applied with a spatula
and without using the mixer tip. Simple to use, it is an excellent
base product for over-painting with ground coat, paint and texture
paint without creating any allowing.
Colour: Black
Working time: 2-3 minutes
Sanding time: 15 minutes
Paint: 1 hour
Size: 6 fl oz and 1.6 fl oz
|
 |
 
Gun 1.6 dispenser gun for two component 1.6
fl oz cartidges
Mix 1.6 static
mixer for 1.6 fl oz cartridges
 
Gun 6 dispenser
gun for two component 6 fl oz cartidges
Mix 6 static
mixer for 6 fl oz cartridges
|
Film 8
This plastic film is used to shape the product; the repair material
does not bond on this film and it allows the technician to work
cleanly.
Size: roll of
14 inches
|
 |
|
Patch 88
Fiberglass + plastic film is used as a base for applying the product,
it gives extra strength and structure to the repaired area, it
protects the hands from contact with the product.
Size: roll of
14 inches
|
 |
|
Cleaner 2011
A water base cleaner and degreaser used to clean the plastic part.
Solvent must not be used as it would be bsorbed by the plastic
and it would create problems during the painting procedures.
Size: spray
bottle 4.2 fl oz
|
 |
|
Primer 2010
Increases the adhesion between the plastic and the repai material
and is absolutely necessary on TPO and thermo plastics in order
to avoid and plastic identification mistake. Do not use on SMC
or fiberglass.
Size: 6.7 fl
oz
|
 |
Introductory Kit 1.6 oz
This kit is supplied with a black plastic case with the
following standard products:
2 Cartridges RIGID 2001
2 Cartridges FLEX 2002
1 GUN 1.6 oz
1 Aerosol PRIMER 2010
1 CLEANER 2011
1 FILM 8
12 Mixer tips 1.6 oz.
Introductory Kit 6 oz
This kit is supplied in a carton box with the following
standard products:
1 FLEX 2002
1 RIGID 2001
1 SEMIRIGID 2005
1 TPO 2004
1 GUN 6 oz
1 Aerosol PRIMER 2010
1 CLEANER 2011
1 FILM 8
1 PATCH 88
12 Mixer tips 6 oz.
Plastomix instructions
 |
 |
| CLEANING clean the surface to be
repaired using Cleaner 2011 and a dry cloth, do not forget to clean
the part from both sides. It's very important to remove dust, grease
and all contaminants in general. |
PREPERATION grind the damaged part
with 80 grit sand paper on both sides. Make a V groove along the
damaged area and use 80 grit sand paper on the surrounding area.
Sand the back side of the repair area. |
| |
|
 |
 |
| CLEANING and PRIMER clean the sanded
surface with Cleaner 2011. Wait approximately 2 minutes and then
apply 2010 primer and wait 5 minutes before applying the plastic
repair product. |
APPLICATION select the proper Plastomix
PU product in reference to the type of plastic to be repaired. Cut
the Patch 88 in the right dimension to cover the back part of the
damage. Apply PU on the patch 88 and place it on the back side f
the repair within 50 seconds. |
| |
|
 |
 |
| SHAPING use the film 8 on the front
surface. Push ample Plastomix PU material through the break to the
front and shape it with your hand. Do not touch the product directly
with unprotected skin. The film 8 must be used every time. |
SANDING after 15 minutes film 8
can be removed. Sand the repaired area (use 80 grit sand paper and
finish with 180 grit sand paper with 2-3 grit steps) to a smooth
finish avoiding excessive speed and heat. |
| |
|
 |
 |
| FINISHING clean the surface with
cleaner 2011. If necessary, use the primer 2010 and apply Plastomix
rapid putty with spatulas to fill minor imperfections of the repaired
surface. |
REFINISHING after 15 minutes sand
the rapid putty with 180-220 grit sanding paper. Clean the area
with cleaner2011. Before painting please follow paint manufacturer's
instructions. |
|
|
