|
|
An innovative, patented system for packaging, metering,
mixing, and dispensing of two-component adhesives, sealants, foams,
coatings, and potting compounds.
Features:
- Ideal for a broad range of dual component adhesives,
sealants, reactive compounds, and two-part foams.
- Eliminates the need for weighing, hand mixing, and
frozen storage
- Avoids air entrapment; improves mixing reliability;
minimizes waste and increases productivity.
- Point of use mixing for highly reactive faster cure
products; can also be used without static mixer to proportion two
part systems
- Manual and air-powered dispensing guns or bench mounted
shot size controlled dispensing equipment available.
- Heavy polypropylene copolymer cartridge wall for strength;
Also available in Nylon 6, HDPE, and optional materials.
- Proprietary plunger seal design provides excellent
leak-resistant sealing for low and high viscosity materials. All platic
design has excellent compatibility.
- Custom filling services widely available.
- Mix ratios from 1:1 to 25:1 and capacities to 1,500
ml.
- Reduces worker exposure to toxic chemicals.
- Uses low cost filling equipment & techniques.
Suggested Use Materials:
- Epoxies, Acrylics, Silicones, Polyesters.
- Epoxy Acrylates, Hybrids, Urethanes.
- Polysulfides, foams, MS Polymers, polyureas.
Cartridge Options: Variable ratio; clip together cartridges
8.4 inch standard length
| Cartridge Combination |
Mix Ratio |
| 30ml x 750ml |
25:1 |
| 30 ml x 300 ml |
10:1 |
| 75 ml x 750 ml |
10:1 |
| 75 ml x 600 ml |
8:1 |
| 75 ml x 300 ml |
4:1 |
| 75 ml x 150 ml |
2:1 |
| 150 ml x 750 ml |
5:1 |
| 150 ml x 600 ml |
4:1 |
| 150 ml x 300 ml |
2:1 |
| 150 ml x 150 ml |
1:1 |
| 300 ml x 750 ml |
2.5:1 |
| 300 ml x 600 ml |
2:1 |
| 300 ml x 300 ml |
1:1 |
| 600 ml x 750 ml |
4:1 |
| 600 ml x 600 ml |
1:1 |
| 750 ml x 750 ml |
1:1 |
5.6 inch standard length
| Cartridge Combination |
Mix Ratio |
| 50 ml x 200 ml |
4:1 |
| 50 ml x 100 ml |
2:1 |
| 50 ml x 50 ml |
1:1 |
| 100 ml x 100 ml |
1:1 |
One-Piece Dual Cartridges
| Cartridge Combination |
Mix Ratio |
| 25 ml x 25 ml |
1:1 /Break-off cap |
| 80 ml x 80 ml |
1:1 /Open end |
| 100 ml x 100 ml |
1:1 /Snip tip or open end |
| 150 ml x 150 ml |
1:1 /Snip tip or open end |
| 300 ml x 300 ml |
1:1 /Snip tip or open end |
| 150 ml x Co-axial |
10:1 & 1:1 /Open end |
| 380 ml x Co-axial |
10:1 /Open end |
Static Mixers- Bell Housings
| Diameter (ID) |
# of Elements |
| 3/16" |
8, 16, 24, 32, 48 |
| 1/4" |
8, 16, 24, 32, 48 |
| 5/16" |
18, 24, 32 |
| 3/8" |
12, 18, 24, 30, 40 |
| 1/2" |
12, 18, 24, 30, 36 |
Wall Tie Extended Static Mixers
| Diameter (ID) |
# of Elements |
| 3/8" |
12 |
| 1/2" |
18 |
Threaded Mixers
These mixers screw directly onto the cartridge housing, eliminating
the need for retaining nuts. Please call for types.
| Diameter (ID) |
# of Elements |
I.D. of Outlet |
Thread Form |
| 5/8" |
20 |
7/16", 9/16" |
Ratio-Pak, Systems II, Euro |
| 9.7 mm |
16,20 |
– |
Euro |
| 9.7 to 6.9 taper |
12 |
– |
Euro |
Accessories and Components
Retaining Nuts:
| Ratio-Pak® |
| -RPN-UA (Universal) - Fits all bell type |
| Systems II™ |
| -TSN 1/4 (1/4" and 3/16" Mixers) |
| -TSN 1/2 (3/8" and 1/2" Mixers) |
Office Restrictors:
Prevents material flow until gun pressure is applied; reduces drip,
cross over, and enhances mixing.
| Description |
| OR-1: (3/16" x 3/16") |
| OR-2: (1/16" x 1/16") |
| OR-3: (3/16" x 1/16") |
| OR-R: (with ring) |
Caps:
| Description |
| C-77 (Fits all cartridges) |
Dispensing Guns
| Manual Guns |
| Part Number |
Cartridge
Configuration |
Desciption |
| PPM-75 |
Stubby 150 |
18:1 M.A./Trigger Type |
| PPM-150 |
75,150 |
18:1 M.A./Trigger Type |
| PPM-300 |
75,150,300 |
18:1 M.A./High Thrust Trigger |
| PPM-300 X |
75,150,300 |
26:1 M.A./High Thrust Trigger |
| PPM-600 X |
300 x 600 |
26:1 M.A. / 2:1 Ratio |
| PPM-750 X |
75 x 750 |
26:1 M.A. / 10:1 Ratio |
| PPM-JAK2 |
Spring Type |
26:1 M.A. / All Ratio |
| Air Powered Guns |
| Part Number |
Cartridge
Configuration |
Desciption |
| PPA-75 LP |
Stubby 150 |
2" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-75 HP |
Stubby 150 |
2-1/2" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-150 |
75,150 |
2" Cylinder/Air Fwd.,
Manual. Rev. |
| PPA-150 HP |
75,150 |
2-1/2" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-300 A |
75,150,300 |
4" Cylinder/Air Fwd.,
Manual Reverse |
| PPA-300 B |
75,150,300 |
2-1/2" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-600 A |
300, 600 |
2:1 Ratio Dedicated |
| PPA-750 |
750x 75 only |
4" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-1500 |
75,150,300,750 |
4" Cylinder/Air Fwd.,
Manual Rev. |
| PPA-150 A |
150 x 150 only |
2" Cylinder/Air Fwd.,
Air Reverse |
| PPA-300 A |
150 x 300 and
300 x 300 |
3-1/2" Cylinder/Air Fwd.,
Air Reverse |
Low cost inports available upon request
- Electrical driven battery type
- Electrical chuck driven type
50B19 Manual Dual Cartridge System
- 50 cc capacity, 1:1 Ratio cartridge with gun or manual
push rod dispensing options.
- Available in clear polypropylene or nylon barrels for
product compatibility.
- Molded in place, break-off cap provides 100% leak resistence.
- Nozzle and cap are "keyway" slotted to provide
oriented, airtight fit, and prevent cross-contamination of reactive
compounds.
- Uses D-25 x 25 manual dispensing gun.
- Variety of mixer and tip options available.
- All plastic plunger for best product compatibility
and long term stability.
- Improved bayonette style mixer latch provides better
mixer.
| Diameter (ID) |
# of Elements |
| 4.9 mm |
16 |
| 5.4 mm |
13 |
| 5.4 mm |
21 |
| 6.3 mm |
12 |
One Piece Dual Cartridges
80 x 80– 160ml capacity
(5.5" length)
Features:
- Low cost, all plastic cartridge in HDPE, Polypropylene,
or nylon
- 1:1 ratio standard; other ratio options available
- Economical all plastic wiper style plunger
- Fits into standard caulk gun
- Available with dedicated low cost manual or air powered
guns
- Separation torque reduces A to B crossover
- Ratio-Pak®, thread form and increased wall
thickness (75/1000)
100 x 100– 200ml capacity (6" length)
Features:
- Available with snip-tip outlet for 100% leak resistance
or with oriented "D" style caps
- Euro thread form and wall thickness of 75/1000
150 x 150– 300ml capacity (8.6" length)
Features:
- Available with snip-tip outlet for 100% leak resistance
or with oriented "D" style caps
- Euro thread form and wall thickness of 75/1000
300 x 300– One Piece Cartridge (8.6" length)
Features:
- Available with snip-tip outlet for 100% leak resistance
or with oriented "D" style caps
- Euro thread form or bell house type mixers available
- Wall thickness of 90/1000 for increased rigidity and
resistance to leaking and blow-by
Ratio-Pak is a registered Trademark of Plas-Pak
Industries, Inc. Patients Pending.
|
|
